Dear Cisco Admin,



My name is Deni Yulianti, 23 years old and I'm doing my final project right now about flow control MPLS on GNS3...



i've problem about IOS, actually i've laptop with specification processor Intel Centrino Duo, 80GB hardisk and 3GB Memory RAM..



can you suggest me IOS for MPLS Router on GNS3 that needed lower RAM sir??


as i know c7200-adventerprisek9-mz.124-4.T1.bin is appropriate as MPLS router but need hgh CPU and RAM,,, in this final project, i'll run 14 routers sir..


now, i use c7200-adventerprisek9-mz.124-4.T1.bin as my IOS but i edited ram for each router from 256MB to 128MB...


i'm afraid if i edit my memory RAM can effect with router and even it can't run as MPLS router sir...



i'm really need your help sir...

thank you so much for your attention and i hope your reply...






Sincerelly Yours,


Deni Yulianti

Please don't double post. I've deleted the other thread

_________________
www.mellowd.co.uk/ccie/

Feature navigator will tell you what you need to find. Add the MPLS feature and go to town.

_________________
"See packet, be packet, you are packet. Ignore all else!" -The Networker
packetsdropped.wordpress.com