All Juniper related discussions.
cas_ccnp
New Member
Posts:
1
Joined:
Tue Dec 01, 2015 4:27 am
Certs:
CCNP

floating static route configuration issue on SRX1400

Tue Dec 01, 2015 4:32 am

Hello Forum Guys,

I encounter following issue when configured static route on SRX1400.

I configured floating static entry for virtual interface as below:

set routing-option static route 10.44.199.54/32 next-hop st0.16 preference 5
set routing-option static route 10.44.199.54/32 qualified-next-hop st0.36 preference 7
commmit

However, when primary route configured with preference 5 is not accessible, route does not use other entry with preference 7. Could somebody explain me what have I missed?

I tested both routes:

set routing-option static route 10.44.199.54/32 next-hop st0.16
set routing-option static route 10.44.199.54/32 next-hop st0.36

When configured separately, they both work fine.

daniele
New Member
Posts:
23
Joined:
Sat May 25, 2013 6:25 am

Re: floating static route configuration issue on SRX1400

Thu Dec 17, 2015 6:31 pm

Hi,

Can you define what you mean by 'not accessible'?
Interface down, or no IP connectivity?
Contributor at www.RouterFreak.com

'

Return to Juniper Networking

Who is online

Users browsing this forum: No registered users and 12 guests