 |
| New Member |
 |
Joined: Wed Jul 18, 2012 7:20 pm
Posts: 2
|
|
Guys I want to connect most of my home to a single router located in basement.
I got the router from ISP and hooked it with one of those devices that transmit Ethernet via electricity and in the ground floor I hooked WRT54g to the other device (electricity transmitter) and configured WRT with the following:
Disabled DHCP so it will be done by the router.
SSID: MainHomeWAN
Security: WPA Shared.
Channel: 11
On the first floor I hooked the WAP54g and configured it as wireless bridge with the same as above and entered the MAC address of WRT device. The only difference is the channel is 6.
In ground floor the signal is great but on first is not because it doesn't get an IP and even if it gets one it losses is soon. So I turned WAP device and I got stale connection but very poor.
What can I do to resolve the problem.
|
|
Register
Search 
Login
