I have got some Aironet 1550C and from its specs it seems to be working in DOCSIS 3.0. we are currently running in less than 2.0. I think it must work in Backward DOCSIS as well. Aironet Modem isn't getting online stucks at init(rc). I am new to it I don't have any idea what is going on.
As the AP is not taking any IP, we are not access it from web and getting only to its console doesn't supports commands. Need some help.
Cisco IOS Software, C1550 Software (C1520-K9W8-M), Version 12.4(23c)JA2, RELEASE SOFTWARE (fc3)
Processor board ID FTX1549P0BC
PowerPC 8349 CPU at 533Mhz, revision number 0x0031
Last reset from reload
LWAPP image version 220.127.116.11
AVR Microcontroller 2 - SW Version: 00.01.09
AVR Microcontroller 4 - SW Version: 00.01.01
AVR Microcontroller 5 - SW Version: 00.01.02
4 Gigabit Ethernet interfaces
2 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 2C:3F:38:BE:4B:E0
Part Number : 73-13538-01
PCA Assembly Number : 800-31224-01
PCA Revision Number : 03
PCB Serial Number : FOC154302XY
Top Assembly Part Number : 800-34862-03
Top Assembly Serial Number : FTX1549P0BC
Top Revision Number : A0
Product/Model Number : AIR-CAP1552C-N-K9