networking-forum.com - View topic - Connecting a AP in 802.1X enviroment

Board index » Cisco Networking » Cisco Security

All times are UTC - 6 hours [ DST ]

Connecting a AP in 802.1X enviroment

Page 1 of 1

[ 3 posts ]

Print view

Previous topic | Next topic

Author

Message

kamarale

Post subject: Connecting a AP in 802.1X enviroment

Posted: Fri Aug 03, 2012 10:42 am

Junior Member

Joined: Tue Mar 15, 2011 8:07 am
Posts: 80
Certs: CCNA

Hello, a couple of doubts :
If I want to connect an AP (if it does not support 802.1X) to a port switch I should configure the port as multi-auth right? So each user authenticates individually.

If the AP supports 802.1X I should configure the AP as a Radius CLient and the port configured without 802.1x right?

Thanks in advance.

Top

kamarale

Post subject: Re: Connecting a AP in 802.1X enviroment

Posted: Mon Aug 06, 2012 7:50 am

Junior Member

Joined: Tue Mar 15, 2011 8:07 am
Posts: 80
Certs: CCNA

Any advice??

Top

srg

Post subject: Re: Connecting a AP in 802.1X enviroment

Posted: Mon Aug 06, 2012 8:25 am

Post Whore

Joined: Thu Dec 30, 2010 2:05 pm
Posts: 1181
Location: Stockholm, SE
Certs: CCNP, CCNP SP, CCDA, CCNA DC, CCNA W, HP MASE

The users authenticate via .1x to the AP and if you have .1x on the switch, the AP has to be authenticated somehow, probably by MAC auth.. dont know of any APs that can be used as .1x supplicant.

_________________
som om sinnet hade svartnat för evigt.

Top

Page 1 of 1

[ 3 posts ]

Board index » Cisco Networking » Cisco Security

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 18 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum