I am trying to upgrade an IOS and I get

The file is there, same bit count as on other switches the same type that upgraded without any issues

I have 2 switches doing this, and 2 that upgraded just fine, all are the same type (1 is a 48 port though)
Tried 3 different IOSs but neither switch will upgrade or downgrade.

Anyone seen this before?

_________________
Freedom to all the people. Brave, true and strong.
Freedom to all the people. Unless I think you're wrong

dhimes.com

Let's see 'dir' and the boot system commands.

_________________
blog.brokennetwork.ca

Switch#dir
Directory of flash:/

2 -rwx 2072 Mar 1 1993 00:02:38 +00:00 multiple-fs
3 -rwx 2960 Mar 3 1993 01:24:01 +00:00 Radius_Testing
4 -rwx 3687 Jun 5 2012 20:46:39 +00:00 defender_correct_wrongPrompts
5 -rwx 3632 Mar 8 1993 05:07:54 +00:00 6-14_TwoFactor_Setup
6 drwx 192 Mar 1 1993 00:06:41 +00:00 c2960-lanbasek9-mz.122-44.SE6
548 -rwx 3252 Mar 1 1993 01:42:22 +00:00 TokenTesting
549 -rwx 9797148 Mar 1 1993 00:18:43 +00:00 c2960-lanbasek9-mz.122-55.SE4.bin
550 -rwx 11660773 Jun 7 2012 14:40:09 +00:00 c2960-lanbasek9-mz.122-58.SE2.bin
552 -rwx 3539 Jun 7 2012 14:44:40 +00:00 NEWIOS
553 -rwx 10600 Jun 21 2012 18:11:08 +00:00 running-config.bakJun-21-14-11-08.414-EDT-1
554 -rwx 8477 Mar 8 1993 05:12:10 +00:00 running-config.bak-Mar--8-00-12-10.885-EST-0
555 -rwx 10508 Jun 20 2012 19:56:35 +00:00 6-14_WANETH_Guide
556 -rwx 10576 Jun 20 2012 19:56:42 +00:00 running-config.bak.Jun-20-15-56-42.265-EDT-0
557 -rwx 1156 Mar 1 1993 00:00:42 +00:00 vlan.dat
558 -rwx 1895 Mar 1 1993 00:26:10 +00:00 config.text
559 -rwx 1915 Mar 1 1993 00:26:10 +00:00 private-config.text

32514048 bytes total (579072 bytes free)
Switch# sh run | i boot
boot-start-marker
boot-end-marker
Switch#sh boo
Switch#sh boot ?
| Output modifiers
<cr>

Switch#sh boot
BOOT path-list : c2960-lanbasek9-mz.122-58.SE2.bin
Config file : flash:/config.text
Private Config file : flash:/private-config.text
Enable Break : no
Manual Boot : no
HELPER path-list :
Auto upgrade : yes
Auto upgrade path :
NVRAM/Config file
buffer size: 65536
Timeout for Config
Download: 0 seconds
Config Download
via DHCP: disabled (next boot: disabled)

_________________
Freedom to all the people. Brave, true and strong.
Freedom to all the people. Unless I think you're wrong

dhimes.com

try boot system flash:c2960-lanbasek9-mz.122-58.SE2.bin

_________________
som om sinnet hade svartnat för evigt.

I don't have a 2960 handy, but I think the boot image is not set right.

Loading "c2960-lanbasek9-mz.122-58.SE2.bin"...c2960-lanbasek9-mz.122-58.SE2.bin: no such device

See, it's saying "no such device". If you look at the one that works it's prefixed with flash:/ which (obviously) tells it what device the image is on. I'd try setting the boot system command correctly (since it's not set) and see what that does.

*edit, srg beat me to it

_________________
blog.brokennetwork.ca

oh well I feel like a tard now
I missed the flash:/ on them

thanks

_________________
Freedom to all the people. Brave, true and strong.
Freedom to all the people. Unless I think you're wrong

dhimes.com