I was wondering if someone could help me with the command for setting a WPA2 shared key on WLAN 2 on my Cisco 526 WLAN controller. This is what I found but does not work.

config wlan security wpa2 pre-shared-key enable 2 "key here"

I believe you need to first set the cypher.
TKIP that sort of thing as well as specify you will be using authentication via PSK (Pre-shared key)
after that it should work.

_________________
CCNA, CCDA, CCNA-SECURITY

I found the answer. The management port was open on our 100 Vlan and I was on our 212 Vlan. >_< It was an easy web interface! ugh sometimes I feel like I should wear a helmet Also luckily the old IT guy chose the same password and username for everything