Hi all,

I have a cisco 2811 router doing nat on my home network and it works fine.
I've connected a cisco 2621 router to the 2811 both have serial T1 cards, I have enabled IP routing on both and have eigrp 1 process running. I can ping and telnet to each router and they are advertising the networks on each other. when i do a traceroute on the 2621 to an outside address or name example (msn.com) I get no reply. what am I missing here any points or direction to another site would be great
i have attached the configs for both r1 and r2 router along with a jpg of the lan

config, ship route and sh ip int br for r1
Current configuration : 5587 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname r1
!
boot-start-marker
boot-end-marker
!
card type t1 0 1
no logging console
!
no aaa new-model
!
resource policy
!
no network-clock-participate wic 1
!
!
ip cef
!
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.0.1
ip dhcp excluded-address 192.168.0.250
ip dhcp excluded-address 192.168.0.2
!
ip dhcp pool CIBU
import all
network 192.168.0.0 255.255.255.0
dns-server 209.18.47.61 209.18.47.62
default-router 192.168.0.1
!
!
ip domain list socal.rr.com
ip domain lookup source-interface FastEthernet0/0
!
!
!
voice-card 0
no dspfarm
!
!
!
!
!
!
!
!
!
!
controller T1 0/1/0
framing esf
linecode b8zs
channel-group 0 timeslots 1-24
!
!
!
!
!
!
!
interface Loopback0
no ip address
shutdown
!
interface FastEthernet0/0
description InTernet
ip address dhcp
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
no cdp enable
!
interface FastEthernet0/1
description Lan
ip address 192.168.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
!
interface Serial0/1/0:0
ip address 192.168.10.38 255.255.255.252
encapsulation ppp
ip route-cache flow
no fair-queue
!
!
router eigrp 1
redistribute connected
redistribute static
passive-interface default
no passive-interface Serial0/1/0:0
network 192.168.10.0
no auto-summary
!
!
!
no ip http server
no ip http secure-server
ip nat inside source list 101 interface FastEthernet0/0 overload
!
access-list 101 permit ip 192.168.0.0 0.0.0.255 any
!
!
!
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
!
!
line con 0
line aux 0
line vty 0 4
line vty 5 15
!
end

r1# sh ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route

Gateway of last resort is 76.168.32.1 to network 0.0.0.0

192.168.10.0/24 is variably subnetted, 3 subnets, 2 masks
D 192.168.10.38/32
[90/2690560] via 192.168.10.37, 00:28:54, Serial0/1/0:0
C 192.168.10.36/30 is directly connected, Serial0/1/0:0
C 192.168.10.37/32 is directly connected, Serial0/1/0:0
76.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 76.168.32.0/20 is directly connected, FastEthernet0/0
S 76.85.238.41/32 [254/0] via 76.168.32.1, FastEthernet0/0
C 192.168.0.0/24 is directly connected, FastEthernet0/1
S* 0.0.0.0/0 [254/0] via 76.168.32.1


r1#sh ip int br
Interface IP-Address OK? Method Status Protocol
FastEthernet0/0 76.168.41.148 YES DHCP up up
FastEthernet0/1 192.168.0.1 YES NVRAM up up
Serial0/1/0:0 192.168.10.38 YES manual up up
Loopback0 unassigned YES manual administratively down down

config ship route and sh ip int br for r2
Current configuration : 949 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname r2
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
ip subnet-zero
ip cef
!
!
ip domain list socal.rr.com
ip domain lookup source-interface Serial0/1:0
ip name-server 209.18.47.61
ip name-server 209.18.47.62
!
!
!
controller T1 0/1
framing esf
linecode b8zs
channel-group 0 timeslots 1-24 speed 64
!
!
!
interface Ethernet0/0
no ip address
shutdown
half-duplex
!
!
interface Serial0/1:0
ip address 192.168.10.37 255.255.255.252
encapsulation ppp
ip route-cache flow
no fair-queue
!
!
router eigrp 1
passive-interface default
no passive-interface Serial0/1:0
network 192.168.10.0
no auto-summary
!
ip http server
ip classless
!
!
!
line con 0
line aux 0
line vty 0 4
!
!
end

r2# sh ip route

Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route

Gateway of last resort is 192.168.10.38 to network 0.0.0.0

192.168.10.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.10.38/32 is directly connected, Serial0/1:0
C 192.168.10.36/30 is directly connected, Serial0/1:0
76.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
D EX 76.168.32.0/20 [170/2181120] via 192.168.10.38, 00:47:57, Serial0/1:0
D EX 76.85.238.41/32 [170/2181120] via 192.168.10.38, 00:47:57, Serial0/1:0
D EX 192.168.0.0/24 [170/2181120] via 192.168.10.38, 00:27:09, Serial0/1:0
D*EX 0.0.0.0/0 [170/2181120] via 192.168.10.38, 00:47:58, Serial0/1:0


r2# sh ip int br
Interface IP-Address OK? Method Status Protocol
Ethernet0/0 unassigned YES unset administratively down down
Serial0/1:0 192.168.10.37 YES manual up up

thanks in advance
hprompt

We should assume you can do that from R1 right?

192.168.10.36/30 isn't in the NAT access list on R1.

i can ping access the internet from r1 not r2

when you say 192.168.10.36/30 isn't in the NAT access list on R1, do I add it as below


ip nat inside source list 101 interface FastEthernet0/0 overload
!
access-list 101 permit ip 192.168.0.0 0.0.0.255 any
access-list 101 permit ip 192.168.10.0 0.0.0.255 any

also I dont have a host connected to r2, i'm consoled into it and can ping anything on the other network except my dns name servers 209.18.47.61 and .62

That acl will work. Or be specific ..... 192.168.10.36 0.0.0.3

i still can't ping my dns server 209.18.47.61 or .62

Try 'ip nat inside' on interface Serial0/1/0:0 on R1.

i tried that and still can't ping my dns servers from r2
thanks for the help

I don't see the config for r2.

it's there right at the end of the config for r1.
on r1 when I do sh ip ei top i get:
P 192.168.10.38/32, 0 successors, FD is Inaccessible
via 192.168.10.37 (2690560/2178560), Serial0/1/0:0
P 192.168.10.36/30, 1 successors, FD is 2439680
via Connected, Serial0/1/0:0
P 192.168.10.37/32, 1 successors, FD is 2178560
via Rconnected (2178560/0)

i'm reading up on 0 successors, FD is Inaccessible

I see .37 as Connected on R1, yet configured on R2. Vice versa for .38.
Is the config you posted complete? e.g. Seeing a static route not shown in the configs.

I pasted your configs into a simple dynamips lab & have no troubles.
Guess if you've cleared the neighborship, and it's still not working, maybe a wri erase, reload and reconfig.

Do you even see a NAT translation on R1 during the attempted ping from R2?