I have been asked to remove a server from the list of SNMP trap destinations but still retain it as one of the SNMP listeners.

For this example we are using two SNMP servers, 1.1.1.1 will be the trap destination and the listeners will be 1.1.1.1 & 2.2.2.2

The current config is as follows:

snmp-server community XYZ RO 10
snmp-server enable traps snmp authentication linkdown linkup coldstart
access-list 10 permit 1.1.1.1
access-list 10 permit 2.2.2.2

To achive this requirement would I use the SNMP entity command?
snmp-server enable traps entity
snmp-server host 1.1.1.1 restricted entity

According to the documentation below the entity command is used of MIB modifications and notifications:
http://www.cisco.com/en/US/tech/tk648/t ... de3e.shtml