Community ForumCommunity Wiki * Blog Home  * Log in

Posts Tagged ‘Cisco’

Upgrading IOS on a Cisco 6500 with a single SUP720

posted in Cisco Networking
by on January 7th, 2013 tags: , ,

Upgrading IOS on a Cisco 6500 isn’t necessarily as simple as loading an IOS image and rebooting the switch.  There are several other items that should also be considered such as modules, firmware, and field programmable devices.  The firmware is the low level operating system beneath IOS that controls how the various components work and interact.

These are some items that might need to be upgraded in addition to the IOS:

Each of the above have their own firmware naming conventions and it can be difficult to find these files. Try to Google partial file names to locate the correct images on the Cisco site. Here are some tips for finding firmware:

  1. The CEF720 line card firmware starts with c2lc-rm2. As of this writing, 12.2(18r)S1 is the current version and the current file name is c2lc-rm2.srec.122-18r-S1
  2. The SUP720 firmware starts with c6ksup720. As of this writing, 8.5(4) is the current version and the current file name is c6ksup720-rm2-srec.8-5-4.srec.
  3. The MSFC3 firmware starts with c6msfc, as of this writing 12.2(17r)SX7 is the current version and the current file name is c6msfc3-rm2-srec.122-17r.SX7.
  4. The field programmable device firmware starts with c6500-fpd-pkg. As of this writing, 12.2(33)SXJ3 is the current version and the current file name is c6500-fpd-pkg.122-33.SXJ3.pkg
  5. The IOS images for the 6500 series SUP720 firmware starts with s72033. As of this writing, 12.2(33)SXJ3 is the current version and the current file name is s72033-ipbase-mz.122-33.SXJ3, depending on your IOS license version

Field programmable devices start with SIP or SPA as part of the module name. You can verify if your chassis has a field programmable device by issuing the following command in the CLI:

show hw-module all fpd

Read the rest of this post »

Cisco Automated Config Backup

posted in Cisco Networking, Technical
by on October 10th, 2012 tags: , ,

SNMP provides a common management interface across platforms that support the MIB OIDs. The ability to automate a process once and not having to worry about CLI syntax nuances across different platforms makes SNMP an ideal choice for network management. The CISCO-CONFIG-COPY-MIB can be used to backup configurations on devices that support this MIB.

There are many products on the market that can backup Cisco device configurations and typically require the user to make a config file that defines each IP address of the device to backup. I manage a lab infrastructure that consists of an aggregate /17 network (consists of ~700 live hosts at any one time) and devices in the lab are constantly being removed/added. Trying to track individual IP addresses in this environment is difficult. The ability to execute automatic host discovery, and once a host is discovered backup the configuration. The aforementioned challenge has to be solved post-haste and I have a budget of $0 for new products. Here is my solution for automated host discovery and config backup.

Configurations are backed up by FTP after writing to the appropriate MIB objects. Networks are scanned by NMAP using ICMP (automatic host discovery). Hosts that reply to the ICMP request are a candidate for backup. Configuration backup will succeed provided that device is using SNMPv2c write access communities or SNMPv3 write access users. Script below uses SNMPv3 as an example. Script will create a directory (named by date) under the users home directory and the backup files will appear as the IP addresses of the device.

Read the rest of this post »

Decreasing BGP Failover Time Using IP SLA

posted in Cisco Networking
by on June 13th, 2012 tags: , , , ,

Service providers are moving away from from providing TDM point-to-point based circuits and we are now seeing more provisioning of Metro Ethernet to the customer site.

This leaves us with an issue in that when your BGP peer becomes unreachable, because your local FastEthernet interface on the CE will still be up/up as it will probably be connected to some Layer 2 device, the customer network could suffer a complete outage for up to 3 minutes. The BGP default hold time is 180 seconds. For a customer that has been sold a 100M pipe with resilience this is not going to make them happy.

Read the rest of this post »

Wendell Odom Q&A

posted in Interviews
by on February 20th, 2012 tags: , , ,

In December, I posted a thread in the Announcement forum asking for you guys to submit any questions you may have for distinguished author and CCIE #1624, Wendell Odom. I sent your questions to Wendell in January and got a quick response but have been a bit slow getting this blog post together. Well, here it is. Enjoy!


Wendell, first off, thanks so very much for sitting down and taking time out of your busy schedule to answer our questions!

How do you feel about Cisco fragmenting their certification paths and seemingly making a certification discipline out of anything they can? Do you feel they’re playing a sort of “catch up” to quickly ratify the newest industry buzzwords in a certification?

Thank you!

Read the rest of this post »

Improving the Routing Table in an OSPF Network

posted in Cisco Networking
by on December 1st, 2011 tags: , ,

OSPF Network

The topology above is an example network, consisting of four OSPF areas (one backbone, area 0) and one external EIGRP area. I’ve set up an IP addressing scheme using for OSPF and for EIGRP. In case you didn’t notice, the second part of the IP address is the same as the area number (10.x.0.0 for area x).

Read the rest of this post »